Debris Removal
Leaves, branches, and other debris are cleared from the roof surface and valleys. Debris holds moisture against the roofing material and can block water flow, causing water to back up under shingles.
Gutter and Downspout Cleaning
Gutters and downspouts are cleared of leaves and debris so water drains away from the house. Clogged gutters cause water to pool at the roof edge and work its way under the roofing material, and they can damage fascia boards.
Flashing and Sealant Check
Flashing around chimneys, vents, skylights, and valleys is checked for rust, gaps, loose sections, or failed sealant. Sealant that has dried out or cracked is replaced. This is one of the most valuable parts of a maintenance visit, because flashing joints are a leading leak source.
Shingle Check
The roofing material is checked for missing, cracked, curled, or lifted shingles. Small areas of damage can be repaired on the spot or noted for a roof repair visit.
Vent and Pipe Boot Check
Rubber boots around plumbing vent pipes crack with age and sun exposure. A maintenance check catches this common leak source before it causes damage.
Moss and Algae Treatment
Moss and algae growth is addressed where present. In a humid climate, dark streaks (algae) and green growth (moss) are common. Moss holds moisture against the shingles and should not be ignored.
Attic and Ventilation Check
Where accessible, the attic is checked for signs of water entry, damp insulation, and adequate ventilation. Poor ventilation shortens a roof's life and can raise energy bills.
Written Summary
The provider should tell you what they found, what was done, and what — if anything — needs attention. Ask for a written summary for your records.